Planet Technology WAP-4030A Manuale Utente

Navigare online o scaricare Manuale Utente per Punti d’accesso WLAN Planet Technology WAP-4030A. Planet Technology WAP-4030A User's Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa

Sommario

Pagina 1

54Mbps Wireless Access Point w/bridge, inter-building WAP-4030A User’s Manual

Pagina 2 - FCC Caution

3.1.1 Client Mode In this screen, you can configure WAP-4030A as a wireless client. It is used to let a network device with only wired Ethernet func

Pagina 3

Parameter Description Station Mode 802.11b: It allows to select the transmit rate up to 11Mbps. Mixed: It allows to select the transmit rate up to 5

Pagina 4 - TABLE OF CONTENTS

Infrastructure: It can let your network device join a wireless LAN through an access point. Channel Select the appropriate channel from the list pro

Pagina 5 - Chapter 1 Introduction

Parameter Description Mode 802.11b mode: It allows to select the transmit rate up to 11Mbps 802.11g mode: It allows to select the transmit rate up

Pagina 6 - 1.4 Specification

securely. You may refer to section 3.5 to know the detail settings of it. WPA: You can use a pre-shared key to authenticate wireless stations and en

Pagina 7 - 1.5 Wireless Performance

and multicast messages. Protection Mode It provides best performance for 11g transmission when you enable it. Transmit Rate When you enable the st

Pagina 8 - 2.1 Hardware Connection

3.1.2.2 Access Filter This Access Point allows you to provide a Filter List of MAC addresses that are allowed/denied associating with this AP. Parame

Pagina 9 - 3.1 Operating Mode

3.1.3 Repeater Mode In this mode, WAP-4030A can be a repeater between Access Point and wireless clients, that can extend the connect distance of your

Pagina 10 - 3.1.1 Client Mode

be 50% as the clients connect to AP directly. When clients connect to second WDS Repeater, the performance will be 25%. Universal Repeater: This repea

Pagina 11 - Description

access point easily. If you are building a public wireless network, enabling this feature is recommended. Disabling "Response to Broadcast ESSID

Pagina 12 - 3.1.2 Access Point Mode

Copyright Copyright © 2005 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, s

Pagina 13 - Parameter Description

Parameter Description AP MAC Address You have to enter the MAC addresses of another WAP-4030A that it will connect to.Mode 802.11b mode: It allows

Pagina 14

3.1.4.1 Advance Setting Parameter Description RTS Threshold When the packet size is smaller the RTS threshold, the access point will not use the

Pagina 15

3.1.5 Point-to-Multipoint Mode This function provides to bridge more than 2 wired Ethernet networks together by wireless connection. You can use more

Pagina 16

3.1.4.1 to configure. Please click “Apply” button to save the above configurations. 3.2 Status In this option, you can see the WAP-4030A current s

Pagina 17 - 3.1.3 Repeater Mode

Parameter Description FW Version It shows the current firmware version. FW Upgrade This tool allows you to upgrade WAP-4030A firmware. Before upgr

Pagina 18

Parameter Description Device Name It shows current device name. Automatic IP If there is a DHCP Server in your LAN, you can select this option to

Pagina 19 - 3.1.4 Point-to-Point Mode

3.5 WEP Parameter Description WEP Length WEP-64: input 10-digit Hex values or 5-digit ASCII character as the encryption keys. WEP-128: input 26-digi

Pagina 20

3.6 WPA-PSK Parameter Description Authentication Type The Pre-shared key is used to authenticate and encrypt data transmitted in the wireless netwo

Pagina 21

Chapter 4 Troubleshooting This chapter provides answer to problems usually encountered during the installation and operation of the Wireless Network A

Pagina 22

interference received, including interference that may cause undesired operation. Federal Communication Commission (FCC) Radiation Exposure Stateme

Pagina 23 - 3.3 Admin

TABLE OF CONTENTS Chapter 1 Introduction ...5 1.1 Package Contents..

Pagina 24 - 3.4 LAN

Chapter 1 Introduction Thank you for purchasing WAP-4030A. The WAP-4030A supports both IEEE 802.11b and IEEE 802.11g standards. You can use it to con

Pagina 25

 Provide WPA-PSK, 64/128-bit WEP Encryption and MAC Filter to protect the wireless data transmissions  Support Wireless AP / Client / Repeater and

Pagina 26 - 3.5 WEP

LED Indicators 3; PWR, WLAN, LAN Power 12V DC, 1A Temperature 0 ~ 55°C (Operating) Humidity 10 ~ 90%, non-condensing (Operating) Dimension 169 x 8

Pagina 27 - 3.6 WPA-PSK

Chapter 2 Hardware Installation Before you proceed with the installation, it is necessary that you have enough information about the WAP-4030A. 2.1 H

Pagina 28 - Chapter 4 Troubleshooting

Chapter 3 Configuring the Wireless AP Web configuration provides a user-friendly graphical user interface (web pages) to manage your WAP-4030A. An AP

Commenti su questo manuale

Nessun commento